#5300 Kid Proof
Velvet Low Sheen Finish
KID PROOF is a premium quality Low-Sheen Velvet Finish made with acrylic resin for the ultimate in durability.
5300 KID-PROOF was developed for surfaces that are most attractive with a velvet low-sheen and need the
durability of an enamel finish. Kid-Proof is also ideal for use as an exterior finish on wood and masonry, and will
provide a beautiful finish for years to come.
Colors:
White, Stock Colors and Full Tint Spectrum. Factory Custom colors with 100 gallon minimum.
Packaging:
Gallons, 5 Gallon Pails.
Finish:
Low Sheen Velvet Finish.
Substrates:
Properly primed wood, masonry, and metal.
Drying Time:
To Touch - 1 to 2 Hours.
To Recoat - 4 to 6 Hours.
Under normal weather conditions @70° F, 50% relative humidity.
Coverage:
300-400 sq ft per gallon depending on surface texture and porosity of surface.
Surface Preperation:
All surfaces to be painted must be free of grease, wax, dirt, loose paint and other contaminants. Glossy surfaces need to be made dull by sanding or use of deglosser. Previously painted surfaces in good condition generally require no primer, spot prime if applicable.
V.O.C.:
Does not exceed 50 grams per liter.
Application:
Airless or conventional spray, brush or roll.
Primers:
Recommended primers are listed below.
Drywall - #63 Dynacoat Enamel Undercoat, #PV101 PVA Sealer.
Brick - #7509 "F" Stop, #95 Busan Acrylic Primer, #330 Draw Tite.
Wood (new) - #95 Busan Acrylic Primer, #63 Dynacoat Enamel Undercoat (interior only).
Wood (painted) - #300 Bus-Stop 100% Acrylic Primer, #97 Selz².
Metal (ferrous) - #301 Rust Stop Red Oxide Primer, #302 Rust Stop White Primer.
Metal (non-ferrous) - #95 Busan Primer, #300 Bus-Stop 100% Acrylic Primer, #302 Rust Stop White Primer, #97 Selz².
Thinning:
Small amount of water if required.
Clean Up:
Soap and warm water clean up.
Note: Two finish coats will always achieve a better looking
more uniform finish and longer lasting job.